BLUETTI collection / Solar panels / 200W Portable Solar Panel
Manufacturer imagery from the supplied BLUETTI catalog. Check the selected quantity and included accessories.
Portable daily replenishment · US offer
200W Portable Solar Panel
One 200W panel
Confirm current price, dispatch date, panel label and box contents with BLUETTI.
Why this panel
Portable daily replenishment.
The current US 200W panel listing combines a folding design, ETFE lamination and MC4 connectors. BLUETTI publishes 24.6V open-circuit voltage and 10.8A short-circuit current. These electrical details matter as much as the 200W label when matching a station.
Where will you use the panel?
Start with a measured daily consumption figure. If your main job is replacing camera, lighting and laptop energy, compare that total with the calculator. If your job is repeated high-power cooking or heating, address the energy demand before assuming a portable panel solves it.
Estimate solar production
How much energy could it collect?
At four peak-sun-equivalent hours and a 70% allowance, the illustrative daily collection is 560Wh. For a 1,024Wh battery starting empty, that is not a one-day full-refill promise, even before considering charging limits or equipment running at the same time.
Estimate = selected rated watts × peak-sun-equivalent hours × delivered-energy allowance. The default 70% is an illustrative system allowance, not measured performance or cell conversion efficiency. Peak-sun hours mean an equivalent amount of full-strength sunshine, not hours between sunrise and sunset. This is not a weather forecast or compatibility check.
Selected panel quantity: One 200W panel. Shade, heat, cable losses, charge-controller limits and battery charge acceptance can reduce energy collected. Loads running during charging reduce net stored energy.
Product specifications
Check the label before connecting.
| Rated power | 200W per panel |
|---|---|
| Open-circuit voltage | 24.6V |
| Short-circuit current | 10.8A; not the same as operating current |
| Connection | Standard MC4 |
| Manufacturer warranty | 12 months, subject to US terms |
What to check before buying
The merchant URL contains SP200L, while the current page uses a generic 200W title and warns against mixing models. This guide follows the current US specification table rather than treating the URL as proof of a manufacturer model number. Confirm the physical label, manual and cable before connecting.
Check voltage, current and connectors
Check panel open-circuit voltage, operating voltage and current, the receiving input’s limits, connector polarity and required cables. For multiple panels, verify the complete array. Cold conditions can raise open-circuit voltage; do not design to a voltage maximum without the required correction and margin.
Read the panel-matching guide →Sources and limitations
Sources and limitations
No exact-model independent bench result is asserted here. BLUETTI’s current listing supplies the specifications; AZSP supplies the planning example. The listed short-circuit current should be checked against the receiving system’s instructions rather than dismissed because actual charging might be lower.
Manufacturer specifications, reviewer findings and AZSP planning calculations are distinct sources of information. No output, charging time or installation outcome is guaranteed.
Manufacturer & support
Contact BLUETTI customer support
BLUETTI supplies portable power stations, solar charging equipment and home energy products. Use its current US documentation to check accessories, operating limits and the configuration you select.
About BLUETTI →US customer support
+1 909-570-0909
Monday–Saturday, 6am–5pm PDT, as published by BLUETTI.
service@bluettipower.com
Current contact details · Manuals & support · Warranty terms
Before you choose
Can I connect two panels just because the station accepts 400W?
Not on wattage alone. The arrangement also changes array voltage or current. Confirm the exact panels, supported wiring and receiving-system limits before buying cables or connecting an array.
Can the panel power household AC appliances by itself?
A solar panel supplies variable DC power. Household AC equipment needs a suitable compatible battery/inverter or other approved system. A panel alone is not a household backup station.
Compare other solar panels
SP100L for a smaller rated panel →Sources & editorial notes
Checked October 26, 2026. Ratings are manufacturer claims. Energy scenarios are AZSP calculations; they are not field measurements. Current prices and availability are left to the merchant.
Check Current Price & Availability ↗